Pegasus Crane reminds: Safety first in lifting operations.

Author:

Release time:

26-09-15

Lifting operations are classified as high-risk special operations; any one of the following hazards—overhead suspended loads, impact loads, wire rope wear, limit‑switch failure, or non‑compliant operating procedures—can potentially lead to a safety accident. In many cases, lifting‑related accidents are not caused by equipment defects but rather by inadequate routine inspections, unauthorized operations, and insufficient safety awareness among personnel.

I. Before Commencing Work: Conduct a Thorough Inspection to Prevent “Working While Ill”

Before each lifting operation begins, operators must conduct a thorough pre‑job inspection: verify that the crane’s limit switches, brakes, alarms, and other safety devices are responsive and functioning properly; examine wire ropes, hooks, and shackles for cracks, broken wires, deformation, corrosion, or other damage; confirm the rated lifting capacity and strictly prohibit overloading or inclined pulling; clear the work area, establish a safety cordon, and keep unauthorized personnel out of the hazardous zone beneath the lifted load; ensure that communication signals between the signaler and the operator are consistent, clear, and unambiguous. Important reminder: if equipment is malfunctioning or safety components have failed, do not attempt to operate the machine under such conditions—stop the equipment, perform necessary maintenance, and only resume use after all potential hazards have been eliminated.

II. During Work: Follow Standard Operating Procedures and Remain Vigilant at All Times

During lifting and hoisting operations, there is no room for even the slightest chance: Only certified personnel may operate; specialized workers must undergo professional training and pass the required assessment, and unqualified individuals are strictly prohibited from operating cranes. Before lifting a load, perform a test lift at a low height to verify that the attachment points are secure and the brakes are reliable, then proceed with smooth, controlled movement. Lift and lower loads at a steady speed; avoid abrupt starts or stops and refrain from swinging heavy loads at high speeds. Never allow anyone to stand beneath the load. In the event of sudden conditions such as strong winds or power outages, respond calmly and prudently—do not panic or make hasty maneuvers.

3. After completing the task: Return equipment to its proper location and maintain thorough maintenance records.

The completion of a lifting operation does not signify the end of safety procedures: park the crane in the designated position, raise the hook, return the control levers to zero, and disconnect the power supply; maintain thorough equipment‑use records, documenting operating conditions and any abnormalities; perform scheduled maintenance at prescribed intervals, promptly replace aged components, and arrange for regular inspections and verifications by qualified professional agencies.

IV. Equipment Selection: Ensuring Safety and Quality at the Source

Safety hinges not only on operational management; the quality of the equipment itself is the first line of defense. At Feima Crane, throughout the entire process—from manufacturing and export to final delivery—we rigorously adhere to national standards as well as relevant international industry norms. Every step, from raw material control and welding procedures to the assembly of safety components, factory testing, and packaging for shipment, is meticulously inspected. Whether deployed in domestic facilities or shipped to overseas projects, our lifting equipment is equipped with comprehensive safety protection systems, providing customers with stable and reliable lifting solutions.

There are no small matters when it comes to safety—prevention is key. Lifting safety is an ongoing endeavor that requires enterprises to fulfill their primary responsibilities, personnel to remain vigilant about safety, and equipment to be kept in optimal working condition. Henan Feima Lifting Machinery Group consistently upholds the principle of safeguarding safe production with high‑quality lifting equipment, helping customers at home and abroad achieve safe and efficient hoisting operations.

None

Crane and Electric Hoist Safety: Essential Tips! 90% of lifting accidents can be prevented with proper precautions.